wgtechno
Tbilisi, Georgia,
Trustseal Verified
Gold Member
Founding Member
Response Time
> 24 Hrs
On-time Delivery Rate
100%
Ask for more details from the seller
Contact Seller
Description
It is made of impact-resistant, high-quality polypropylene raw material.
Since it does not transmit UV rays, it does not allow algae and bacterial growth.
The o-ring is made of natural rubber and provides high sealing.
Their inner surfaces are homogeneous and non-porous.
It does not contain any foreign substances that can change the smell and taste of water.
Over-tightening the nut during assembly will cause additional stress on the adapter. The product that has been subjected to additional stress in this way cannot be expected to meet the guaranteed pressure values. For this reason, it should not be forgotten that the product is plastic and should only be tightened with enough force to ensure sealing.
Pipe connection adapters should be kept away from hard and sharp objects during storage and installation. If the installation will be laid underground, it should be covered with sand to protect it from hard and sharp objects. Damaged adapters should never be used.
In order to get maximum efficiency from pipe connection adapters, tees and elbows should be mounted on the pipe at an angle of 90° and other adapters at a 180° angle. Connections at different angles will cause stress on the adapter, and the life of the installation will be reduced.
Teflon tape should be used in threaded connections. Teflon tape should be wrapped around the adapter long enough to prevent water leakage and in the tightening direction. While using too little Teflon tape will cause the adapter to leak water, using too much will create additional stress on the adapter. This may cause the adapter to break during assembly.
Seller Profile
Company Information
wgtechno
Tbilisi, Georgia,
Trustseal Verified
Manufacturer
Gold Member
Founding Member
WGTechno was founded in Tbilisi, Georgia, in 2010. It is the shining star of the irrigation sector with its factory with a monthly plastic processing capacity of 580 tons as of 2023 and its dealership network that has exceeded the borders of the country. Every product we produce in Georgia, China and Turkey is guaranteed for at least one season. Pipes, fittings, pumps, filters, greenhouses and automatic irrigation controllers are just a few of our areas of expertise. If you would like to become our dealer in irrigation and agricultural equipment, you can start the process by sending a message.